Legacy product — discontinued and no longer available for purchase. This page is kept as part of the RudiStor product history (c. 2006). See the current lineup for available models.

NX-02 sistema discontinued

Transconductance High Current Headphone Amplifier

Year: c. 2006
Status: removed from the catalog — replaced by newer generations.

Series: NX-03 Family — Solid-State Class A NX-01NX-02 sistemaNX-03 Class ANX-33DAC-X3RP3K-SS

NX-02 is a completely new machine, an extraordinary performing although simple amplification unit, joined with a fascinating hi-end box. An exercise of technology and design, to give the audiophile the best sound and the pleasure to own an artwork.

The sound quality and performance are absolute: this amplifier can drive any headphone from 4 to 1000 Ohm. The distortion (linear, harmonic and intermodulation) is so low at all frequencies and levels that it is hard to measure.

Linearity is perfectly flat from DC to 100 kHz, and the damping factor is so high that this amp can easily drive small speakers. No capacitors are used in the signal path, and no global negative feedback is used.

The amplifier uses operational amplifiers as signal amplifiers and bias voltage servo actuators, in a simple but effective circuit with a very short signal path and only a few selected components. The current output devices are Darlington bipolar transistors assisted by a solid-state constant-current generator.

NX-02 is extraordinarily fast; combined with its high dynamics and overall power, this generates a sensational punch feeling. The neutral sound, deep and controlled bass, and transparent highs are the key points of this small but great amplifier.

The amplifier is totally silent, with the noise floor reduced to the extraordinary figure of −113 dB, making it the right choice for SACD.

Headphone protection: a circuit called the bias voltage comparator performs an initial safe-condition check and then monitors the working conditions. If an unsafe condition is detected, the headphones are immediately electrically disconnected from the amplifier.

NX-02 is made using lead-free components and soldered with a lead-free tin/silver alloy, in respect of the environment as per EU directive.

Discontinued in March 2008 and replaced by the NX-03.

Specifications

Maximum Output1.5 W on 16 Ohms
Output Impedance0 to 1000 Ohm
Maximum Swing14 Vpp at 32 Ohm
Gain14 dB
BandwidthDC–100,000 Hz < 0.15 dB
Noise Floorbelow −113 dB
THD0.003% (13 Vpp on 32 Ohm)
Amplification ClassAlways A-Class
Weight5 kg
Dimensions25 × 30 × 7 cm